DR1103

NOTE:  This product does not require a bushing

• Material: 17/4 stainless steel, includes right and left frame components
• Application: 
  • SRAM Universal Derailleur Hanger and Full Mount derailleurs
  • Flat mount brake calipers, 140 mm rotor
  • Post mount brake calipers, 160 mm rotor
  • The seat stay tabs are swept back, allowing stay and caliper clearance for all frame sizes

INFORMATION FROM SRAM:

"The interface for a full mount rear derailleur is the same for MTB and Road. The clearance model is the same for both with the exception that the Road has an added clearance surface (see image below). The surface is called "Road AXS RD on UDH hanger" (see red arrow in photo). Basically, this surface represents the worst case scenario for a specific combination of Road RD's with certain cassette sizes when used on a UDH hanger. Those combinations are a 36T Max RD with a 10-28T cassette or a 44T Max RD with a 10-36T cassette. During these two combinations, the RD is represented with this surface. Any other combination is ok and also full mount RD are ok and not relevant to this surface."

Eyelets: No